DeWalt DWMT70775 Instruction Manual page 9

WARNING: AIR SUPPly AND CONNECTIONS
• Do not use oxygen, combustible gases, or bottled gases
as a power source for this tool as the tool may explode,
possibly causing injury.
• Do not use supply sources which can potentially exceed
200 PSI (13.8 bar) as tool may burst, possibly causing injury.
• The connector on the tool must not hold pressure
when air supply is disconnected. If a wrong fitting is used,
the tool can remain charged with air after disconnecting
and thus will be able to after the air line is disconnected
possibly causing injury.
• Always disconnect air supply:
1) Before making adjustments;
2) When servicing the tool;
3) When tool is not in use;
4) When moving to a different work area, as accidental
actuation may occur, possibly causing injury.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
9