Hyundai LS5T-52 Owner's Manual
  1. Manuals
  2. Brands
  3. Hyundai Manuals
  4. Log Splitter
  5. LS5T-52
  6. Owner's manual
Hyundai LS5T-52 Owner's Manual

Hyundai LS5T-52 Owner's Manual

5 ton log splitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FOR YOUR SAFETY
READ AND UNDERSTAND THE ENTIRE MANUAL
BEFORE OPERATING MACHINE
MODEL NUMBER : LS5T-52
SERIAL NUMBER :
Both model number and serial number may be found on the main label.
You should record both of them in a safe place for future use.
Save This Manual for Future Reference
65563UK00M100.indd 1
2019/8/30 11:38:43

Advertisement

Table of Contents
loading

Related Manuals for Hyundai LS5T-52

Summary of Contents for Hyundai LS5T-52

  • Page 1 FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE MODEL NUMBER : LS5T-52 SERIAL NUMBER : Both model number and serial number may be found on the main label. You should record both of them in a safe place for future use.
  • Page 2 65563UK00M100.indd 2 2019/8/30 11:38:43...

  • Page 3: Safety Warnings & Cautions

    SAFETY WARNINGS & CAUTIONS SYMBOL AFFIXED TO THE SAFETY WARNINGS & INSTRUCTIONS MACHINE • UNDERSTAND YOUR LOG SPLITTER Read and understand the owner's manual and labels affixed to the log splitter. Learn its application and limitations as well as the specific potential hazards peculiar to it.
  • Page 4 • EXTENSION CORDS Improper use of extension cords may cause inefficient operation of the log splitter which can result in overheating. Be sure the extension cord is no longer than 10m and its section is no less than 2.5mm² to allow sufficient current flow to the motor. Avoid use of free and inadequately insulated connections.

  • Page 5: Table Of Contents

    • DON'T FORCE TOOL It will do a better and safer job at its design rate. Never try to split logs larger than those indicated in the specifications table. This could be dangerous and may damage the machine. Don't use log splitter for a purpose for which it was not intended. •...

  • Page 6: Application Conditions

    +5℃ and 40℃ and for installation at altitudes no more than 1000m above M.S.L. The surrounding humidity should less than 50% at 40℃ . It can be stored or transported under ambient temperatures between -25℃ and 55℃ . SPECIFICATIONS LS5T-52 Model Number 230V~ 50Hz...

  • Page 7: Electrical Requirements

    ELECTRICAL REQUIREMENTS Connect the main leads to a standard 230V±10% (50Hz±1Hz) electrical supply which has protection devices of under-voltage, over-voltage, over-current as well as a residual current device (RCD) which maximum residual current rated at 0.03A. CONTENTS OF THE SHIPPING CONTAINER A.

  • Page 8: Set Up And Preparation For Operation

    SET UP AND PREPARATION FOR OPERATION 1.Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at both ends and place it on a 60-75cm high, stable, flat and level work surface. 2.Familiarize yourself with the controls and features of this log splitter in the illustrations. 1.

  • Page 9: Wiring Diagram

    17.Max Pressure Limiting Screw D O N O T A D J U S T THE MAX PRESSURE LIMITING SCREW ! Max pressure was set before the log splitter ex work and the max pressure limiting screw is sealed with glue to ensure the log splitter works under pressure no more than 5 tons.

  • Page 10: Log Splitter Operation

    LOG SPLITTER OPERATION This log splitter is equipped with"ZHB"control system that requires to be operated by both hands of the user-Left hand controls the hydraulic control lever while right hand controls the pushbutton switch. The log splitter will freeze upon absence of either hand. Only after both hands release the controls, the log pusher starts to return backward to the starting position.

  • Page 11: Freeing A Jammed Log

    Always set logs firmly on the log retaining plates and work table. Make sure logs will not twist, rock or slip while being split. Do not force the blade by splitting the log on the upper part. This will break the blade or damage the machine.

  • Page 12: Replacing Hydraulic Oil

    REPLACING HYDRAULIC OIL Replace the Hydraulic oil in the log splitter after every 150 hours of use. Take following steps to replace it. ·Make sure all moving parts stops and the log splitter is unplugged. ·Unscrew Oil Drain Bolt with Dipstick to remove ·Turn the log splitter on the Support Leg side over an 4 liters capacity container to drain the hydraulic oil off.

  • Page 13: Trouble Shooting

    TROUBLE SHOOTING PROBLEM PROBABLE CAUSE REMEDY SUGGESTED R e f e r t o " L o g S p l i t t e r Log is improperly positioned Operation"section for perfect log loading. The sizes or hardness of the log. R e d u c e t h e l o g s i z e s b e f o r e e x c e e d s t h e c a p a c i t y o f t h e splitting it on the log splitter.

  • Page 14: Parts Schematic

    65563UK00M100.indd 14 2019/8/30 11:38:44...

Table of Contents