D-Link DSL-584T Quick Installation Manual page 9

Configuring the Router (continued)
PPPoE/PPPoA Connections
If you selected the PPPoE/PPPoA connection type in the previous menu, you will see the
Setup Wizard menu pictured here. Type in the Username and Password used to identify and
verify your account to the ISP. Enter the VPI and VCI numbers that have been provided by
your ISP. Select the Connection Type used for encapsulation specific to your service. Click
Next when you are ready to continue to the Setup Completed menu.
If you are not sure what Connection Type, VPI and VCI to use, please check with your ISP.
Type the
Username
and
Password
for your ISP
account.
Choose the correct Connection Type from
the pull-down menu. The user may choose
between PPPoA
PPPoA LLC, as instructed by your ISP.
VC-Mux, PPPoE LLC or
Click
the Setup Completed menu below.
9
Enter the
and
numbers that
have been
provided by
your ISP.
the Next button. Skip ahead to
VPI
VCI