Multiview Faqs - Philips EVNIA 42M2N8900 User Manual

Q13: How to unlock/lock my hotkey?
Ans.: Please press
to unlock/lock the hotkey, by
doing so, your display pops out
"Attention" to show the unlock/
lock status as shown below
illustrators.
  
  
Q14: Where can I find the Important
information manual mentioned
in EDFU?
Ans.: Important information manual
can be downloaded on the Philips
website support page.
for 10 seconds

13.3 Multiview FAQs

Q1: Can I enlarge the PIP sub-
window?
Ans.: Yes, there are 3 sizes to select:
[Small], [Middle], [Large]. You can
press
Select your preferred [PIP Size]
option from the [PIP / PBP] main
menu.
Q2: How to listen to Audio,
independent of a video?
Ans.: Normally the audio source is
linked to the main picture source.
If you want to change audio-
source input, you can press
enter in the OSD menu. Select
your preferred [Audio Source]
option from the [Audio] main
menu.
Please note that the next time
you turn on your display, the
display will by default select the
audio source you chose last time.
In case you want to change it
again, you need to go through
the above steps to select your
new preferred audio source,
which then will become the
"default" mode.
Q3: Why do the sub-windows flicker
when I enable PIP/PBP?
Ans: It's because the sub-windows
video source is interlace timing
(i-timing), please change the
sub-window signal source to
progressive timing (P-timing).
40
to enter the OSD menu.