Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna DSS200 Operator's Manual

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Wear personal protective equipment. See
instructions under the "Personal
protective equipment" heading.
WARNING! Risk of crush injuries! There is
always a risk of crush injuries when
working with products containing moving
parts.
WARNING! Hot surface.
WARNING! Watch out for demolition
material becoming loose when cutting.
Use personal safety equipment and keep
your distance.
This product is in accordance with
applicable EC directives.
Environmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic
waste. It must instead be submitted to an
appropriate recycling station for the
recovery of electrical and electronic
equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
58 – English

KEY TO SYMBOLS

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
NOTICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CAUTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.