Memory Function - Mercedes-Benz GLC 2017 Operator's Manual

Memory function

106
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 127).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disengaged
R
reverse gear
when you use button ? to select the exterior
R
mirror on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey is not in the igni-
tion lock.
Storing settings
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: position of the exterior mirrors
R
on the driver's and front-passenger sides
position of the head-up display
R
Adjust the seat accordingly (
X
On the driver's side, adjust the steering wheel
X
( page 101) and the exterior mirrors
Y
( page 103).
Y
Press memory button M and then press one of
X
the memory position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
Calling up a stored setting
Press and hold the relevant memory position
X
button 1, 2 or 3 until the following compo-
nents are in the saved position:
page 97).
Y