Acer NITRO XZ322QU User Manual page 25

Adjusting the System settings
• Auto Source: Enables/Disables the monitor to automa�cally search for
available input sources (Off / On).
• Wide Mode: Adjusts the aspect ra�o of the monitor (Full / Aspect / 1:1)
• Hot Key Assignment: Assigns the func�on that the hot keys on the OSD portal
will access.
• Hot Key 1 (Modes / Brightness / Volume / Gamma / Contrast / Blue Light /
Over Drive / VRB)
The setting options include:
• Hot Key 2 (Modes / Brightness / Volume / Gamma / Contrast / Blue Light /
• Input: Selects the input source (HDMI1 / HDMI2 / DP1 / DP2).
Over Drive / VRB)
• Auto Source: Enables/Disables the monitor to automatically search for
available input sources (Off / On).
Note: If you need to configure BIOS, it is recommended to turn Auto Source
to Off and select Input to the correct corresponding input source.
• Wide Mode: Adjusts the aspect ratio of the monitor (Full / Aspect / 1:1)
• Hot Key Assignment: Assigns the function that the hot keys on the OSD portal
will access.
• Hot Key 1 (Modes / Brightness / Volume / Gamma / Contrast / Blue Light /
Informa�on
Over Drive / VRB)
• Hot Key 2 (Modes / Brightness / Volume / Gamma / Contrast / Blue Light /
Over Drive / VRB)
• DDC/CI: Enables/Disables you to configure the monitor using software
installed on your computer (Off / On).
Note: DDC/CI stands for Display Data Channel/Command Interface. It
enables users to send commands to adjust the monitor's configurations.
• HDMI Black Level: Adjusts the black level range of an HDMI input source
(Normal / Low).
The se�ng op�ons include:
• Quick Start Mode: Speeds up the monitor's boot-up process (Off / On).
• Reset All Se�ngs: Resets the OSD menu to its default se�ngs.
• Exit: Exits the OSD menu.
15