Troubleshooting - Fisher & Paykel DD60DA9 Installation Manual

DD60DA and DD60DC models
DISPLAY POSSIBLE CAUSE
Water
A1:
Supply fault.
+ all modifiers
RINSE
Drawer cannot
A3:
drain. The drainage
hose may be
blocked or kinked,
, + all modifiers
DELICATE RINSE
or the connection
to drainage pipe
may be blocked.
The spray
A6:
arm has loosened
or come off its
mounting, or
, + all modifiers
FAST DELICATE
water pressure
is too low, or a
combination of low
water pressure and
excessive foaming.
DD60DD models
DISPLAY POSSIBLE CAUSE
A1
Water supply fault.
A3
Drawer cannot drain. The
drainage hose may be
blocked or kinked, or the
connection to drainage
pipe may be blocked.
A6
The spray arm has
loosened or come off
its mounting, or water
pressure is too low.
18
WHAT TO DO
1 Ensure the water supply is turned on.
2 Press once to stop the beeping,
then again to clear the fault.
3 Press to resume the wash program.
1 Ensure the drainage hose and
connection to pipes are not blocked.
2 Press once to stop the beeping,
then again to clear the fault.
3 Press to resume the wash program.
1 Open the drawer and check the
spray arm.
2 If the spray arm has loosened or
come off its mounting, re-fit it.
Check that it is firmly seated and
turns freely. Refer to 'Maintenance'
in your user guide.
3 Press once to stop the beeping,
then again to clear the fault.
4 Press to resume the wash program.
WHAT TO DO
1 Ensure the water supply is turned on.
2 Press once to stop the beeping, then again
to clear the fault.
3 Press to resume the wash program.
1 Ensure the drainage hose and connection to
pipes are not blocked.
2 Press once to stop the beeping, then again
to clear the fault.
3 Press to resume the wash program.
1 Open the drawer and check the spray arm.
2 If the spray arm has loosened or come off its
mounting, re-fit it. Check that it is firmly seated
and turns freely. Refer to 'Maintenance'.
3 Press once to stop the beeping, then again
to clear the fault.
4 Press to resume the wash program.

TROUBLESHOOTING

No program indicator lights up when the drawer is opened
Ensure power is connected and is switched on.
z
may need to be activated. Refer to your user guide for details.
AUTO POWER-ON
z
Drawer doesn't close properly
Ensure nothing is obstructing the drawer from closing such as hoses or drawer latches.
z
Water appears around water supply and drain connections
Check hoses, connections and existing plumbing for leaks.
z
Check rubber washer and hose clamp are correctly fitted.
z
Product is tipping
Ensure the product is secured to the cabinetry.
z
Front panels are misaligned to surrounding cabinetry
Check the cabinetry is square. Check and relevel product. Unscrew the product from the
z
cabinetry. Adjust the feet to level the product, then re-secure to the cabinetry.
If a problem occurs that is not listed, refer to your user guide for additional troubleshooting If
after checking these points, you still need assistance, please refer to the Service & Warranty
book for warranty details or contact us through our website fisherpaykel.com