Advertisement
All manuals and user guides at all-guides.com
FOR SAFE AND EFFICIENT OPERATION
CAUTION – TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BOTTOM), NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNAL.
DANGEROUS VOLTAGE – UNINULATED DANGEROUS VOLTAGE THAT
MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS WITH IN THIS PRODUCT'S ENCLOSURE.
WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO PAIN OR MOISTURE.
IMPORTANT NOTES
A VOID INSTALLING THE UNIT IN LOCATIONS DESCRIBED BELOW.
• PLACES EXPOSED TO DIRECT SUNLIGHT OR CLOSE TO HEAT
RADIATING APPLIANCES SUCH AS ELECTRIC HEATER.
• NO TOP OF ORDER STEREO EQUIPMENT THAT RADIATES TOO MUCH
HEAT.
• PLACES LACKING VENTILATION OR DUSTY PLACES.
• PLACES SUBJECT TO CONSTANT VIBRATION.
• HUMID OR MOIST PLACE.
• TAKE CARE NOT TO OBSTRUCT THE VENTILATION OPENINGS.
• OPERATE CONTROLS AND SWITCHES AS DESCRIBED IN THE
MANUAL.
•
BEFORE TUNING ON THE POWER OR THE FIRST TIME, MAKE CERTAIN
THE BATTERIES AND/OR POWER CORD ARE PROPERLY INSTALLED.
POWER CONNECTION
1. PLUG THE AC POWER CORD TO A HOUSEHOLD OUTLET. MAKE SURE
THE VOLTAGE IS CORRECT (240V-VOLT, 50Hz) TO PREVENT POSSIBLE
DAMAGE TO THE SET.
2. CONNECT ONE 9-VOLT BATTERY (NOT INCLUDED) TO THE BATTERY
TERMINALS IN THE BATTERY COMPARTMENT (UNDERSIDE OF THE
CABINET). IT MAINTAINS THE CLOCK TO FUNCTION EVEN IF THE AC
POWER IS INTERRUPTED.
PLEASE NOTE: THE DISPLAY WILL NOT EXHIBIT TIME DURING
3.
POWER FAILURE BUT THE CLOCK WILL KEEP CORRECT TIME.
-1-
Advertisement
