Table of Contents
Advertisement
8.5 To Cancel the Program or Reselect the Options
Press the "On/Off" button for 2 seconds to shut down the program.
Press "On/Off" button to turn on the machine. Select the new program and options.
Press "Start / Pause"to start the new program without adding any extra detergent.
8.6 Programme end
When programme finished its running, it will display "End". If no operation is taken in
30 seconds, the machine will turn off automatically.
Press "On/Off " button for 2 seconds to turn off the machine;
Close the tap;
Open the door and take the washed clothes out;
Slightly open the door to remove moisture in the pump.
8.7 Door Lock Icon
After the program starts the Door Lock icon will light up and the door will be locked.
The door is always locked when a program is running. It is not possible to open the
door while the icon is flashing. Trying to forcibly open the door will cause damage to the
appliance.
If you wish to open the door due to an emergency you must press the "Start / Pause"
button. It is important to check the spin speed of the drum, the level of the water inside
the drum, and the temperature of water, before trying to open the door.
If the door would not open after 2 – 3 minutes you can select the spin program to drain
the water from the drum. Switch off the appliance and open the door.
Safety Notice: If the program is interrupted during the wash, the temperature of the
items inside, and the drum, may be. very high. To avoid any scalding, or burns, care
must be taken before removing any clothes from the drum.
8.8 Tap Icon
Inlet Water Tap Icon Lights Up.
If the appliance detects that no water has entered the drum, the Tap icon will light up.
Make sure the water tap is turned on and press the "Start / Pause" button. If the icon
still lights up, please refer to the User's Operation Manual Troubleshooting Guide.
8.9 Draining Pump Icon
The Draining Pump Icon Lights Up.
If the appliance detects that water in the drum has not been drained up, the Draining
Pump icon will light up. Please make sure before the drainage process starts, the water
in the drum has been cool down, the drain hose has not been frozen, knotted, or
blocked, and the draining pump filter has not been blocked.
After all the checking, please press "Start/Pause" button. If the Draining Pump icon still
lights up, please unplug the washing machine, and contact the After-Sales Service
department.
20
Advertisement
Table of Contents
