Wash Cycles And Functions; Table Of Wash Cycles; Wash Functions - Hotpoint RD 1076 J Instructions For Use Manual

Table of Contents

Advertisement

Wash cycles and functions

Table of wash cycles

Description of the wash cycle
ANTI CREASE
1 Daily Wash & Dry (Daily Mix Wash & Dry)
2 Shirts Wash & Dry
3 Pre Iron
4 Steam Refresh
DAILY CLEAN
5 Anti-Stain Turbo 45' (Anti Stain Turbo 45')
6 Anti-Stain Power 20°C (Anti Stain Power 20°C)
7 Cotton: lightly soiled resistant and delicate colours.
8 Eco Cotton
(1-2): heavily soiled whites and resistant colours.
60°/40°
9 Synthetics (3): lightly soiled resistant colours.
SPECIALS
10 Multicolour (Multi Colour)
11 Ultradelicates (Ultra Delicates)
12 Wool: for wool, cashmere, etc.
13 Sport
14 Fast (Fast 30') (**): to refresh lightly soiled garments quickly (not suitable for wool, silk
and clothes which require washing by hand).
Partial Programmes
Rinse
Spin + Pump out
*
Pump out only
*
If you select programme
and exclude the spin cycle, the machine will drain only.
**
If a drying cycle is also programmed, the machine will run a "wash+dry" programme lasting 45' with maximum spin speed and a 1kg laundry load.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 8 with a temperature of 60°C.
2) Long wash cycle for cottons: set programme 8 at temperature 40°C and press the DIRECT INJECTION button under "Power" mode.
3) Long wash cycle for synthetics: set wash cycle 9 with a temperature of 40°C.

Wash functions

! If the selected function is incompatible with the set pro-
gramme, the relevant indicator light will appear dimly lit; in
addition, the incompatibility will be signalled by a buzzer
(3 beeps) and the wording "No Selection" will appear on
the display.
! If the selected function is incompatible with another pre-
viously set function, the wording "No Selection" will appear
on the display and the function will not be enabled.
Steam
This option enhances washing performance by generating
steam during the wash cycle to remove any bacteria from
the fibres, which are treated at the same time. Place the
laundry in the drum, choose a compatible programme and
select option
.
!
The steam generated during the operation of the washing
machine may cause the porthole door to become hazy.
Detergents
Max.
Max.
temp.
speed
(°C)
(rpm)
40°
800
40°
1000
-
-
-
-
-
-
-
-
20°
1200
(Max. 40°C)
20°
1600
40°
1600
(Max. 90°C)
60°
1600
40°
1000
(Max. 60°C)
40°
1600
30°
--
40°
800
40°
600
30°
800
-
-
1600
-
-
1600
-
-
-
--
GB
3
2
-
1,5
-
2
5,5
10
10
10
5
10
1
2,5
4,5
4
10
-
10
-
10
11

Advertisement

Table of Contents
loading

Table of Contents