Care And Maintenance Instructions; Emptying The Bin; Cleaning The Filter - iRobot Roomba j6+ Owner's Manual

Care and Maintenance

Care and Maintenance Instructions

To keep your robot running at peak performance, perform the procedures
EN
on the following pages. There are additional instructional videos in the
iRobot Home App. If you notice the robot picking up less debris from your
floor, empty the bin, clean the filter and clean the brushes.
Part
Bin
Filter
Full Bin Sensor
Front Caster Wheel
Edge-Sweeping Brush and
Multi-Surface Brushes
Sensors and Charging
Contacts
Camera Window
Bags
Dock Charging Contacts
and Visual Docking Target
Blower Cover inside
canister
Note: iRobot manufactures various replacement parts and assemblies. If you
think you need a replacement part, please contact iRobot Customer Care
for more information.
6 For more information, visit global.irobot.com
Care frequency Replacement Frequency*
Wash bin as needed
Clean once a week (twice a week if Every 2 months
you have a pet). Do not wash.
Clean every 2 weeks
Clean every 2 weeks Every 12 months
Clean once a month (twice a month Every 12 months
if you have a pet)
Clean once a month
Clean and inspect once a month
Bags should be replaced
when prompted by the
LED indicator/app.
Once every month
Once every month (remove debris
from blower cover)

Emptying the Bin

1
Press the bin release
button to remove bin.
2
Open bin door to empty bin.
3
Place bin back in the robot.

Cleaning the Filter

1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by tapping
the filter against your trash
container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important: The robot will not
run if the filter is not installed
correctly. Replace the filter every
two months.