Wet Bath Shower Stall; Dinette; Lighting And Switches; Magic Light Operating Instructions - Airstream Nest 2019 Owner's Manual

Interior

Wet Bath Shower Stall

To clean your fiberglass shower stall unit, use warm
water and one of the stronger liquid detergents. Do not
use abrasive cleaners as they may scratch and dull the
surface of your unit. Stubborn stains can be removed
with solvents such as turpentine, paint thinner, or
acetone. Restore dulled areas by rubbing with an
automotive type liquid cleaner, then, put the soft glow
back into your unit with a light application of liquid wax.
CAUTION
Applying wax to the base of the shower floor is
not recommended, as this could create an unsafe
surface.

Dinette

On the U-shape dinette floor plan, the dinette converts
to a bed. Lift the tabletop off the table support post.
Remove post and store in wardrobe closet. Drop
tabletop between benches and move seat backrests
from the perimeter walls onto the table area to
complete the conversion. Reverse this process to re-
assemble the dinette table.
The Front Bed model has storage behind the dinette
cushions and under the dinette seat.

Lighting and Switches

Nest features a variety of lighting options inside and
outside of the cabin. Lighting over the lounge, galley,
side-mounted sofa or pantry, wardrobe and under-bed
storage are switched at the fixture. Lighting for the
all other light sources are controlled by wall-mounted
switches.
The water pump is powered by a switch on the
SeeLevel II monitor panel, the water heater is
powered by a switch in the control panel area under
the refrigerator, and the A/C unit and furnace are both
controlled by the thermostat.
5-4

Magic Light Operating Instructions

Additional information is located in your Owner's
Packet.
• The Magic Light Switch is located on wall opposite of
galley.
• To turn the Magic Light on/off press the power button
on the wall switch. The power button will illuminate
blue when the power is off.
• To dim or brighten the Magic Light press the up or
down button on the wall switch.
• All other features are controlled with the app
available on both Android or IOS platforms.
NOTE
The battery disconnect must be on for power to the
wall switch. The power button on the wall switch
must be on for functions to operate within the
magic light app.
1. Download App: Search "Magic Light-BLE" in
the App store or "Magic LED Light V2" in the
Google Play Store and click install. Depending
on your operating system, Android or IOS, your
screen layout may differ slight from the following
screenshots.
2. Open App: Turn on the Bluetooth on your phone or
tablet and open the app.
2019 Nest