Gigabyte B660 AORUS ELITE AX DDR4 User Manual page 24

10) M2A_CPU/M2P_SB/M2M_SB (M.2 Socket 3 Connectors)
The M.2 connectors on the motherboard support only M.2 PCIe SSDs.
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Locate the M.2 connector where you will install the M.2 SSD, use a screwdriver to unfasten the screw on
the heatsink and then remove the heatsink.
Step 2:
Locate the proper mounting hole based on the length of your M.2 SSD drive. If needed, move the standoff
to the desired mounting hole. Insert the M.2 SSD into the M.2 connector at an angle.
Step 3:
Press the M.2 SSD down and then use the included screw to secure it in the connector. Remove the
protective film from the bottom of the heatsink. Then replace the heatsink and secure it to the original hole.
* Types of M.2 SSDs supported by each M.2 connector:
M2A_CPU
M2P_SB
M2M_SB
_3
_3
M.2 PCIe x4 SSD M.2 PCIe x2 SSD
a
a
a
U
U
110 80
110 80
110 80
M.2 SATA SSD
a
a
a
- 24 -
60
60
60
r
r
r
M2A_CPU
M2P_SB
M2M_SB