Frigidaire FFAD6023W1 Use & Care Manual page 13

2. To turn the unit on, press the
unit will run in Auto mode. In this mode, the
unit will automatically set a comfortable
humidity and fan speed according to the
indoor environment.
temperature < 65˚F, the humidity will be
set as 55% When room temperature ≥ 65˚F
and ≤ 77˚F, the humidity will be set as 50%;
When the room temperature T > 77˚F, the
humidity will be set as 45%. In Auto mode
press or button
feature.
3. It is recommended to press the Cont. Drain
button to use the CONTINUOUS setting for
the first three or four days until the
sweating and
stopped. In this setting the unit will run in
the maximum power and the display will
show actual room humidity.
OPERATING INSTRUCTIONS
button. The
When
will cancel
dampness odors
4. Press the Turbo Fan button to activate the
Turbo Fan feature. In this feature the unit
will run in high fan speed to maximize the
dehumidification speed.
room
this
5. After a few days when the Relative
Humidity has declined, press the Cont.
Drain button to deactivate the Cont. Drain
feature
or buttons to choose a value between
35% to 85%, so the room is kept at a
comfortable humidity. Pressing the
buttons will change the humidity selection
in 5% increments. After you have set the
desired humidity, the readout will display
the actual room humidity.
have
then press the
13
HUMIDITY
or