Table of Contents
Advertisement
Detach the connector
3
and then loosen the screws.
4f
4g
4e
4c
4a
4b
4d
When installing: Ensure that the connector is attached firmly to the system board.
Remove the thermal module assembly
5
.
When installing: Before you attach the thermal module assembly to the computer, apply thermal grease, at
an amount of 0.2 grams, on the part marked
a
and
b
as shown in the following illustrations. Either too much
or too less application of grease can cause a thermal problem due to imperfect contact with a component.
58
Hardware Maintenance Manual
Advertisement
Table of Contents
