Assembly - SMART SM-03-642 Manual

5. Folding Wheels Bracket
6. Paving Pad

8. ASSEMBLY

Following the assembly directions below, you will
assemble the plate compactor in a few minutes.
1. Mount the handle to the chassis with the
M10X90 bolt, washers and nut.
2. Unscrew bolt 5 x 35 from throttle control. Secure
the Throttle Control onto the Upper Handle with
a flat washer 5 and the bolt 5 x 35 that just were
unscrewed.
Folding Wheels Kit
1. Slide the wheels over the stub axles. Secure with
hairpin retainers and flat washers.
ENG
2. Pull out the pin first, adjust the wheels to the
suitable distance, then tighten with the pin.
3. Pull up the spring bolt and put the upper pipe of
the wheels bracket into the mounting bracket.
Align two ends of the pipe with the holes. Slide
the bolt in and secure with the clips.
Paving Pad Kit
1. The transparent rubber Paving Pad allows to
compact concrete paving slabs, stones, bricks
and blocks silently and gently.
2. Attach the Paving Pad onto the Base Plate as
shown. Align the holes in the Base Plate, Paving
Pad and Clamp Plates, and secure it with 3 bolts
M10x25 and lock washers
Engine Oil
OIL HAS BEEN DRAINED FOR
SHIPPING. Failure to fill engine sump
with oil before starting engine will
result in permanent damage and void
engine warranty.
Add oil according to Engine Manual packed
separately with your tiller.