GE APFD06JASW Owner's Manual And Installation Instructions page 6

Controls
Features and appearance may vary.
Icons on the remote control indicate the selected settings
D
F
C
6
REMOTE CONTROL
1. Insert the two AAA batteries (provided).
2. Aim the remote control at the signal receiver on the
B
control panel to operate the air conditioner.
A. Power Button
Turns ON/OFF power to the air conditioner.
E
B. Mode Button
Press the Mode button to toggle among the operating
options, cooling, fan and dry mode.
A
C. + and – Button
Adjusts the Temperature or Timing set value.
D. Fan Button
Press the Fan button to adjust fan speed from Low to
High speed.
E. Timer
Press Timer button to activate the ON/OFF timer. Use
the + and – buttons to adjust the timer.
F. Sleep Button
Press the Sleep button to turn on the sleep mode.
Note:
minute after last button is pushed. To turn on LED
display, press any button on the unit or the remote.
Then press control corresponding function to change
the settings, the remote may require multiple pushes to
synchronize with the unit.
49-5000527 Rev. 3