Table of Contents
Advertisement
competent technician.
• The minimum clearance between exhaust
hoods and the cooking surface must be at
least the distance indicated in the exhaust
hood installation instructions.
• The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the assembly
instructions.
• If the appliance is to be installed above an
oven, the oven must be fitted with a cooling
fan.
Appliance overall dimensions (mm)
L (mm)
Built-in cabinet dimensions (mm)
X (mm)
700
A (mm)
B (mm) C (mm)* D (mm)
min 110 min 460 min 750 20 - 40
*If there is a piece of furniture above the
hob. In the case of a hood refer to
to the dimensions indicated in the relevant
manual.
Fastening to the built-in cabinet
To prevent leakage of liquid between the frame
of the hob and the countertop, place the
adhesive seal provided along the entire outer
edge of the hob before assembly.
91477A898/A
720
Y (mm)
492
E (mm)
min 50
1. Refer to the dimensions indicated in the
figure, bearing in mind that the long front
and rear sides must be flush with the hole.
2. Press lightly to make the seal stick to the
edge around the hole in the worktop. The
front and rear sides of the seal must be flush
with the hole.
3. Place the hob on the insulating seal and fix it
to the supporting structure using the screws
and fastening brackets supplied (A) so that
the hob is perfectly level.
INSTALLATION - 35
Advertisement
Table of Contents
