Knowing Your Device; Accessories; Getting Started; Charging The Battery - Mio Cyclo 210 User Manual

Table of Contents

Advertisement

Knowing your device

Accessories

Your device comes with the following accessories. To use your device on a bike,
ensure you use the specific bike mount kit that came with your device. Mio may
provide optional accessories for specific models. Please visit Mio website
(www.mio.com) for information.
• USB cable
• Bike mount kit
Note: Depending on the specific model purchased, the colour and look of your device and
accessories may not exactly match the graphics shown in this document.
Status indicator
• Glows in amber: battery charging.
• Glows in green: battery full.
• Flashes in green: when the
backlight is turned off.
POWER button
Turns your device on and off.
Touch screen
• Displays the output of your device.
• Tap the screen with your finger to
select menu commands or enter
information.
Memory card slot
This function is reserved for
debugging purposes only.
Micro-USB connector
Connects the USB cable.
Bike mount socket
For the device mount.

Getting started

Charging the battery

Your device has an internal battery that may not be fully charged when you
purchase it. You should charge the battery for at least 5 hours before you start
using it for the very first time.
To charge the battery, use the supplied USB cable to connect the device to a
computer, USB charger or power adapter.
CAUTION:
For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• Failure to follow the battery usage instructions could cause damage to your device,
battery and even bodily injury or property damage and will void the warranty.
• When storing the product for a long period of time, charge the battery to 50% –
80% capacity to prevent excess discharge.

Performing the initial start-up

1. Mount the device and accessories on to your bike. For more information, see
the "Installing the device" section.
2. Press and hold the POWER button for 3 seconds to turn your device on.
3. Follow the prompts to personalise your device, including:
• Select your preferred language.
4
3 SEC

Advertisement

Table of Contents
loading

Table of Contents