Yamaha MT-07 2021 Owner's Manual page 25

To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and while the digits are flashing, push
the "INFO" switch until it is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter "TRIP F" and starts counting the
distance traveled from that point.
To reset the fuel reserve tripmeter,
change the display to the fuel reserve
tripmeter, and while the digits are
flashing, push the "INFO" switch until it
is reset.
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
Instantaneous
display
EAU92231
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG" when using
miles. To switch the fuel consumption
measurement units, push the "TRIP"
switch until the measurement units
change.
"km/L": the distance that can be
traveled on 1.0 L of fuel.
"L/100 km": the amount of fuel
necessary to travel 100 km.
"MPG": the distance that can be
traveled on 1.0 US gal of fuel.
Instrument and control functions
EAU92430
TIP
fuel consumption
When traveling under 10 km/h (6 mi/h),
"_ _._" is displayed.
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
1
eled on the current tank of fuel.
Average fuel consumption display
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
4-7
EAU87790
4
EAU92440
1