Trouble Shooting Guide - Power Acoustik BAMF-1200/4 Owner's Manual

TROUBLE SHOOTING GUIDE

SYMPTOMS
Is the power
NO SOUND
LED illuminated?
No power to power wire
AMP NOT
No power to remote
SWITCHING
wire with receiver on
ON
Fuse broken
Check speaker leads
NO SOUND
Check audio input
IN ONE
leads
CHANNEL
Check speaker load
impedance
AMP
TURNING
OFF
MEDIUM/
HIGH
VOLUME
CHECK POINTS
- 20 -
CURE
Check fuses in amplifier.
Be sure Turn-on lead is connected
Repair power wire or connections
Check connections to radio
Check fuse
Inspect for short circuit or an
open connection.
Reverse Left and Right
RCA inputs to determine if it is
occurring before the amp.
Check Tuner/Deck volume level.
Clean contacts on fuse holders.
Be sure proper speakers are used
to ensure impedance
recommendations are observed.
(If you use an Ohmmeter to
check speaker resistance,
please remember that DC
resistance and AC impedance
may not be the same.)