Page 1
LED TV LF58** www.lg.com (M4 X L14) (M4 X L20) 42LF58** 42/50/55LF58** 32LF58** P/No: MFL68906403 (1502-REV00) Printed in Korea...
Page 2
English Read Safety and Reference. O’zbekcha Р П Р А а а аа аа а аа а Română Citiţi Siguranţă şi referinţe. а а а а а а а У а а П а П а а а а English English Р...
Page 5
OPTICAL DIGITAL AUDIO OUT H/P OUT ANTENNA / CABLE IN LF58*V LF58*U AUDIO/ VIDEO VIDEO AUDIO MONO VIDEO AUDIO...
Page 7
32LF5800-ZA 42LF5800-ZA 50LF5800-ZA 55LF5800-ZA 32LF580V-ZA 42LF580V-ZA 50LF580V-ZA 55LF580V-ZA 32LF5809-ZA 42LF5809-ZA 50LF5809-ZA 55LF5809-ZA 32LF580U-ZA (mm) 732 x 481 x 207 961 x 610 x 218 1128 x 708 x 255 1243 x 772 x 255 732 x 437 x 55.5 961 x 567 x 55.5 1128 x 660 x 55.8...
Page 8
Данные по энергоэффективности для моделей телевизоров LG * Указанные модели телевизоров не имеют «выключенного режима» Для полного отключения телевизора - отсоедините его от сети питания. Удельная мощность рабочего Потребляемая мощность Потребляемая мощность Модель режима: изделием в режиме ожидания: изделием в выключенном режиме...
Page 9
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL68662439* P/NO : MFL68662439 (1504-REV01) Printed in Korea...
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with WARNING Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following environments: Insert power cable plug completely into wall socket otherwise if not...
Page 11
Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Page 12
Only use the attachments / accessories specified by the manufacturer. Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. When installing the antenna, consult with a qualified service technician.
Page 13
We recommend that you maintain a distance of at least 2 to 7 times When connecting external devices such as video game consoles, make the diagonal screen size when watching TV. If you watch TV for a long sure the connecting cables are long enough. Otherwise, the product period of time, this may cause blurred vision.
Page 14
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. Prevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.
Page 15
Generated sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera- ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: If the product feels cold to the touch, there may be a small “flicker”...
(Depending on model) AN-VC5** AN-MR500 AN-WF500 Smart camera Magic Remote Wi-Fi/Bluetooth Dongle LG Audio Device * You can use the Magic Remote and LG Audio Device(Wireless) only when you are using the Wi-Fi/Bluetooth Dongle.
Lifting and moving the TV Using the joystick button Please note the following advice to prevent the TV from being scratched (Image shown may differ from your TV.) or damaged and for safe transportation regardless of its type and size. You can simply operate the TV functions, pressing or moving the joystick • ...
NOTE 2 Connect the power cord to a wall outlet. • Use a platform or cabinet that is strong and large enough to CAUTION support the TV securely. • Brackets, bolts and ropes are not provided. You can obtain • Do not place the TV near or on sources of heat, as this may result in additional accessories from your local dealer. fire or other damage. Using the kensington security Mounting on a wall system (This feature is not available for all models.) Attach an optional wall mount bracket at the rear of the TV carefully • Image shown may differ from your TV. and install the wall mount bracket on a solid wall perpendicular to The Kensington security system connector is located at the rear of the the floor. When you attach the TV to other building materials, please TV. For more information of installation and using, refer to the manual contact qualified personnel. LG recommends that wall mounting be provided with the Kensington security system or visit http://www. performed by a qualified professional installer. We recommend the use kensington.com. Connect the Kensington security system cable between of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with the TV and a table. cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.
Page 19
• If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel.
Connections (notifications) Adapter connection (Depending on model) Connect various external devices to the TV and switch input modes to CAUTION select an external device. For more information of external device’s connection, refer to the manual provided with each device. • Please be sure to connect the TV to the AC-DC power adapter Available external devices are: HD receivers, DVD players, VCRs, audio before connecting the TV’s power plug to a wall power outlet.
Remote control Adjusts the volume level. The descriptions in this manual are based on the buttons on the remote Accesses your favourite programme list. control. Please read this manual carefully and use the TV correctly. Views the information of the current programme and screen. To replace batteries, open the battery cover, replace batteries (1.5 Mutes all sounds.
Page 22
pqrs wxyz MUTE (Depending on model) .,;@ pqrs wxyz MUTE Views the information of the current programme and screen. Accesses the Home menu. Shows the list of Apps. Navigation buttons (up/down/left/right) Scrolls through menus (POWER) Turns the TV on or off. or options.
LG Electronics will also provide open source code to you on CD-ROM • Turn the TV off/on using the remote control. for a charge covering the cost of performing such distribution (such • ...
Specifications CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating 0 °C to 40 °C Wireless LAN module specification Temperature • Because band channel used by the country could be different, the Operating user can not change or adjust the operating frequency and this Less than 80 % Humidity...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
KEY CODES kEy CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 27
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 31
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 32
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 33
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 34
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 35
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 36
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...