Chapter 14
3. Configure
ICMP-FLOOD Attack
SYN-FLOOD Attack
•
ICMP-FLOOD Attack Filtering
packets to trigger the ICMP-FLOOD protection immediately when the number
of packets exceeds the preset threshold value.
•
UDP-FlOOD Attack Filtering
trigger the UDP-FLOOD protection immediately when the number of packets
exceeds the preset threshold value.
•
TCP-SYN-FLOOD Attack Filtering
SYN packets to trigger the TCP-SYN-FLOOD protection immediately when the
number of packets exceeds the preset threshold value.
4. Click Save.
14. 13. 6. Duplex
Select the duplex type from the drop-down list and click Save. Duplex (or full-duplex)
communication can go in both directions at once, while half-duplex communication can
go only one way at a time. If you are not sure, you can keep the default
Filtering,
Filtering.
- Enter a value between 5 and 7200 ICMP
-Enter a value between 5 and 7200 UDP packets to
- Enter a value between 5 and 7200 TCP-
UDP-FlOOD Attack Filtering
Manage the Router
and
TCP-
Auto
Negotiation.
96