Honda FIT 2017 Owner's Manual page 74

uuIndicatorsu
Indicator Name
Shift Lever Position
Indicator
Transmission
Indicator
M (7-speed manual
shift mode)
Indicator/Shift
Indicator
Seat Belt Reminder
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
72
On/Blinking
Indicates the current shift lever position.
●
*
Blinks if the transmission system has a
●
problem.
*
Comes on when 7-speed manual shift
●
mode is applied.
*
Comes on and the beeper sounds if you
●
are not wearing a seat belt when you
turn the ignition switch to ON
If the front passenger is not wearing a
●
seat belt, the indicator comes on a few
seconds later.
Blinks while driving if either you or the
●
front passenger has not fastened a seat
belt. The beeper sounds and the
indicator blinks at regular intervals.
2 Shifting P. 319, 321
Blinks while driving - Avoid sudden starts and
●
acceleration and have your vehicle checked by a
dealer immediately.
2 7-Speed Manual Shift Mode P. 323
The beeper stops and the indicator goes off when
●
you and the front passenger fasten their seat belts.
( w *1 . Stays on after you or the front passenger has
●
fastened the seat belt - A detection error may
have occurred in the sensor. Have your vehicle
checked by a dealer.
2 Seat Belt Reminder P. 33
Explanation