Operations; Starting; Self Test (For External Controller Model); Door Alarm (For External Controller Model) - LG GR-M4924CPN Owner's Manual

OPERATIONS

STARTING

When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.

SELF TEST (FOR EXTERNAL CONTROLLER MODEL)

Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,
●
it will display an error code to assist the repair technician. While an error code is displayed, other
control and display functions will not operate.
If an error code is displayed, contact a service center. Do not disconnect the power cord from
●
the outlet.

DOOR ALARM (FOR EXTERNAL CONTROLLER MODEL)

When the door of the refrigerator is open 1 minute, an alarm will sound three times. If the door remains
open, the alarm will repeat every 30 seconds.

AUTO LAMP OFF

When the door is open for 7 minutes or longer, the lamp inside goes off automatically to save energy
and prevent overheating. However, the alarm sound continues until the door is closed.

CONTROLS FOR REFRIGERATOR COMPARTMENT

FOR INTERNAL CONTROLLER MODEL

REF. TEMP. CONTROL
MIN
Ref. Temp Control Button

FOR EXTERNAL CONTROLLER MODEL

Display graphic can be different, depend on the type of your refrigerator.
A type
< >
Press 'REFRIGERATOR' button to control refrigerator temperature.
G
Whenever pressing the button, the LED emits light.
G
The number showing up on the LED luminesce indicate the temperature of refrigerator compartment.
G
You can select the desired setting point seven steps, from '0
G
The default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
TEMP CONTROL button.
MAX
(COLDEST)
When the button is pressed, the LEDs light.
The temperature is set in 5 steps, from MIN to MAX.
B type
< >
C type
< >
o
C' to '6
12
o
C'.