Power Management - Dell Vostro 3584 Setup And Specifications Manual

Power management

Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.
Enable Intel Speed
•
Shift Technology
Default setting: Enabled
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
•
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
•
Default setting: Disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
•
•
Advanced Battery This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge charging algorithm and other techniques, during the non work hours to improve the battery health.
Configuration
Enable Advanced Battery Charge Mode- is disabled
Primary Battery Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
28 System setup
Enable Intel Speed Shift Technology
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter
is removed during Standby, the system setup removes power from all the USB ports to conserve battery
power.
Enable USB Wake Support
Disabled
WLAN
Enable peak shift—is disabled
Set battery threshold (15% to 100%) - 15 % (enabled by default)
Adaptive—enabled by default
Standard—Fully charges your battery at a standard rate.
Primarily AC use
Custom