Asus ROG STRIX Z490-E Manual page 61

M.2 Fan Step Up
This item allows you to set the value of the M.2 Fan step up.
Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec]
[153 sec] [178 sec] [204 sec]
M.2 Fan Step Up
This item allows you to set the value of the M.2 Fan step down.
Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec]
[153 sec] [178 sec] [204 sec]
M.2 Fan Speed Low Limit
This item allows you to disable or set the M.2 Fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600
RPM]
M.2 Fan Profile
This item allows you to set the appropriate performance level of the M.2 fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following items appear only when M.2 Fan Profile is set to [Manual].
M.2 Fan Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the M.2 Fan
temperature. The M.2 Fan will operate at the maximum duty cycle when
the temperature source is higher than the limit.
M.2 Fan Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum M.2 Fan duty cycle. When
the temperature source reaches the upper limit, the M.2 Fan will operate
at the maximum duty cycle.
M.2 Fan Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the M.2 Fan
temperature.
M.2 Fan Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the M.2 Fan middle duty cycle.
M.2 Fan Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the M.2 Fan
temperature. The M.2 Fan will operate at the minimum duty cycle when
the temperature source is lower than the limit.
M.2 Fan Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum M.2 Fan duty cycle. When
the temperature source is under the limit, the M.2 Fan will operate at the
minimum duty cycle.
ROG STRIX Z490-E BIOS Manual
Sets to [Standard] to make the M.2 Fan automatically adjust
depending on the chassis temperature.
Sets to [Silent] to minimize the fan speed for quiet M.2 Fan operation.
Sets to [Turbo] to achieve maximum M.2 Fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
61