Table of Contents
Advertisement
Assembly
1
Attaching the cabinet handle
□
Position the cabinet handle (B) over the holes on the
cabinet (C).
□
Attach with the bolts (BB) and tighten with supplied
wrench (CC) or 10mm wrench/socket.
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
Two people are recommended for assembly.
CAUTION:
Operation
1
Removing the drawers
□
Fully extend the empty drawer.
□
u P
h s
u
p
t
e h
o
e n
e r
down on the other release lever.
□
Pull the drawer outward until it is released from the
drawer slide.
C
B
BB
e l
s a
l e
v e
r e
w
h
e l i
pulling
2
Attaching the casters
□
Be sure the drawers are locked and lay the cabinet (C)
□
t A
a t
h c
t
e h
s
w
v i
side as the handle, inserting bolts (AA) through the swivel
casters(E) and into the cabinet (C).
□
Tighten with supplied wrench (CC) or 12 mm wrench/socket.
□
Repeat this process for the xed casters (D) on the
opposite side of the cabinet (C).
□
Return the cabinet (C) to its upright position.
Do not over tighten the bolts.
CAUTION:
AA
2
Re-inserting the drawers
□
Extend the drawer slides.
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
5
Please contact 1-888-HD-HUSKY for further assistance.
l e
a c
t s
r e
( s
) E
o t
t
e h
n u
, t i
n o
E
C
HUSKYTOOLS.COM
t
e h
a s
m
e
Advertisement
Table of Contents
