Corrections; Removed Features - Polycom SoundPoint IP 300 Release Note

Release Notes - SIP Application

2.5.2 Removed Features

None.

2.5.3 Corrections

The following issues have been resolved with this release:
• 11264: SoundStation IP 4000 hangs when booting if custom DHCP option 150
of type String is used
• 11302: SoundPoint IP 300 and 301 incorrectly truncate displayed line label if
the reg.x.label field is empty and reg.x.address is longer than 4 characters
• 13904: SoundStation IP 4000 always shows LAN Mode as half-duplex
• 14077: Under certain DNS failover conditions, the phone stops sending DNS
and SIP requests
• 14110: Phone does not reset to using "All Certificates" for CA Certificates
after the user chooses the Reset Device Settings menu option
• 14163: Phone incorrectly updates Placed Calls list with an empty entry after
New Call then End Call are pressed
• 14166: Calls answered on a phone with a shared line are incorrectly logged in
the Received Calls list of another phone sharing that line
• 14474: Phone won't upload all log files to TFTP boot server if
LOG_FILE_DIRECTORY specified in <Ethernet Address>.cfg doesn't exist
• 14509: If the SAS-VP xml response has a blank or missing "contactaddr"
element, the phone does not use the "username" field for the contact address
and may lock up during reboot
• 14510: The "username" field in a SAS-VP xml response is not used as the SIP
login name for authentication of SIP messages
• 14557: The SAS-VP key is cleared if the user chooses the Reset Device
Settings menu option
• 14634: Blind transfer fails with certain devices due to NOTIFY behavior
• 14684: Problems with text entry interface in custom certificate installation
display
• 14805: Shared lines behave incorrectly if the line registration contains a '.'
• 14935: Phone begins to ring when there is no incoming call in specific shared
line scenario
• 15104: SoundStation IP 4000 CDP does not advertise new link duplex levels
correctly
• 15122: Time displayed on phone changes from correct to incorrect shortly
after a reboot in some scenarios
• 15162: Phone clears application log file during a warm boot even if the upload
to the boot server failed
Copyright © 2006 Polycom, Inc.
Changes
Page 7