Remington POWER Series Use And Care Manual page 19

Before using, read the important
safety instructions in front of the
manual.
1. Plug power adaptor
into shaver. (Dia A)
2. Plug power adaptor
into wall outlet.
(Dia B)
3. Charge shaver for
24 hours. Note:
During initial
charge ignore the
electronic indicators
as they are in
"start up cycle".
1. Press power button
to turn on. (Dia D)
2. Shave face and
neck using short,
circular strokes.
(Dia E)
For models PR-1230 and PR-1235 only:
1. Plug power cord into shaver, plug cord
into wall outlet. (Dia F, G)
2. Slide power switch up to turn on, down
to turn off. (Dia H, J)
3. Shave face and neck using short,
circular strokes. (Dia I)
Charging
A
B
Shaving
A D
G
Green light goes off
5 minutes after fully
charged. (Dia C)
4. Use shaver until
recharge is required.
5. Repeat steps 3 & 4
for at least three times before batteries
have been properly conditioned.
CAUTION!
■ Make sure the shaver and your hands
are dry when charging the shaver.
■ Always charge the shaver in a cool,
dry place.
B E
H
J
C
F
I
19