Jrgb1: Rgb Led Connector; Gpu Led; Ez Debug Leds - MSI B450M BAZOOKA V2 Quick Start Manual

JRGB1: RGB LED connector

The JRGB1 connector allows you to connect the 5050 RGB LED strip 12V.
Important
The JRGB1connector supports up to 2 meters continuous 5050 RGB LED strips
y
(12V/G/R/B) with the maximum power rating of 3A (12V).
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing the RGB LED strip.
Please use MSI' s software to control the extended LED strip.
y

GPU LED

This LED indicates the CPU' s iGPU is not detected and you need to install a graphic
card.

EZ Debug LEDs

These LEDs indicate the status of key components during booting process. When an
error is occurred, the corresponding LED stays lit until the problem is solved.
1
Extension cable
JRGB1
GPU LED
EZ Debug LEDs:
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.
JRGB1
1
1 +12V 2 G
3 R 4 B
5050 RGB LED strips 12V
Overview of Components
35