Side Tones On/Off; Dtmf; Dtmf Encode Sequence - Motorola Commercial Series Selling Manual

Hide thumbs Also See for Commercial Series:
Table of Contents

Advertisement

2-26
Periodic - If the system requires periodic awareness of who is transmitting, for example for health &
safety reasons, then a telegram is sent when the PTT is first pressed and periodically during the
transmission.
De-Key - An encode telegram can also be sent 'On Dekey' when the PTT is released, to act as a
Cleardown call.
Benefits
Telegrams tied to PTT provide valuable system information.
Telegrams sent Once on PTT simplifies radio operation.
End of Message Alert speeds up communications.
10.7

Side Tones On/Off

Whenever the radio encodes (sends) a 5 tone telegram, usually these tones are also heard from the
radio's loudspeaker to act as a confidence aid for the radio user. In the case of Telegram on PTT,
this also indicates when it is OK to start to talk.
These 'side tones' can be set on or off, to cater for the user's preference.
11.0

DTMF

DTMF (Dual Tone Multi Frequency) is used when the radio is required to operate with an interface to
a telephone system.
On all radios a DTMF encode sequence can be sent, and
on the CM360 with keypad mic, the keypad can be put into DTMF live dial mode.
Each DTMF encode sequence can:
be up to 24 digits long;
have digits 0 - 9, P (pause),
The radio does not decode DTMF. A DTMF decode option board can be fitted if required.
11.1

DTMF encode sequence

All radios can send pre programmed DTMF sequences. The sequences cannot contain a
combination of 5T and DTMF digits; however, 5T and DTMF sequences can be combined in a
telegram.
*
#.
and
FEATURES AND BENEFITS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm300

Table of Contents