Honeywell VNT5150H1000 Installation Manual page 16

Installation Steps (continued)
3
Hanging the ERV/HRV
The ERV/HRV unit enables you to save time and effort by offering a simplified hanging system.
TIP: Removing the core unit makes installation easier since the unit weighs less
without the core inside.
1. Attach straps to joist using the supplied
washers and four 1 in. hex-head hanging
screws.
NOTE: If the unit is not level, improper drainage will occur and could lead to moisture and leakage
problems.
14
3. Make final adjustments to ensure that the HRV/ERV is level.
2. Pull on middle of strap while gently lifting unit
upward to raise the unit.
ERV/HRV Ventilation Systems 69-2480EF—01