Table of Contents
Advertisement
Care and Maintenance
f
Secure embroidery foot "Q" with the embroidery foot
screw, making sure that embroidery foot "Q" is
vertical.
a
1 Mounting notch
2 Embroidery foot screw
g
Hold the embroidery foot in place with your right
hand, and then use the included screwdriver to
securely tighten the embroidery foot screw.
CAUTION
• Use the included screwdriver to firmly tighten
the screw of the embroidery foot. If the screw
is loose, the needle may strike the presser foot.
The needle may break, possibly resulting in
injury.
h
Touch
to unlock all keys and buttons.
48
b
If the thread becomes tangled under the
bobbin winder seat
If the bobbin winding starts when the thread is not passed
under the pretension disk of the bobbin winding thread guide
correctly, the thread may become tangled under the bobbin
winder seat.
CAUTION
• Do not remove the bobbin winder seat even if
the thread becomes tangled under the bobbin
winder seat. Otherwise, there is a risk of being
injured by the cutter of the bobbin winder
seat.
Do not remove the screw on the bobbin
winder guide post, otherwise the machine may
be damaged; you cannot wind off the thread
by removing the screw.
1 Screw of the bobbin winder guide post
a
Stop the bobbin winding.
b
Cut the thread with scissors beside the bobbin winding
thread guide.
c
Slide the bobbin winder shaft to the left, and then
remove the bobbin from the shaft and cut the thread
leading to the bobbin in order to be able to completely
remove the bobbin from shaft.
d
Hold the thread end with your left hand, and wind off
the thread clockwise from under the bobbin winder
seat with your right hand as shown below.
a
Advertisement
Table of Contents
