Programming Call Tones and VibraCall
Your radio can transmit call tones to other radios in your group so you can alert them
that you are about to talk. Your radio is programmed at the factory with call tones
turned off (set to 0), but you can change this setting to choose a distinctive call tone.
®
The VibraCall
feature is an additional call tone option that makes the CLS1410 radio
vibrate briefly when it receives if you have not transmitted or received in the last
30 seconds. Select call tone 4 to turn VibraCall
®
VibraCall
is on.
1. In advanced configuration mode, press S until Edisplays.
2. Press [or ] to hear and select the call tone. Select call tone 4 for
®
VibraCall
(CLS1410 only).
3. Press and hold Push to Talk to exit, or press S to continue
programming.
To transmit your call tone, press B on the side of the radio.
Note: When VibraCall (call tone 4) is selected,
transmit call tone.
®
(CLS1410 only)
®
on. i displays on the radio when
button is disabled and radio does not
B
31