Table of Contents
Advertisement
Configuring the USB ports using the BIOS
You can enable or disable the front and rear USB .0 and USB 3.0 ports from the BIOS
Setup.
To disable or enable the USB ports:
1.
Press <Delete> to enter the BIOS Setup at startup.
.
From the BIOS Setup screen, click Advanced > USB Configuration.
3.
Select the USB port that you want to enable or disable.
4.
Press <Enter> to enable or disable the selected USB port.
5.
Click Exit and select Save Changes & Reset to save the changes made.
Refer to Chapter 1 for the locations of the USB ports.
ASUS BM1845, BM1645/MD50
35
Advertisement
Table of Contents
