Pioneer AVH-A105DVD Owner's Manual page 18

[AV Source Settings]
Menu Item Description
[Radio settings] (page 12)
[Bluetooth Audio]* Setting Bluetooth audio source activation.
[On] [Off]
* AVH-A205BT
[AUX Input]
Menu Item Description
[AUX Input] Set to [On] for AUX source (page 17).
[On] [Off]
[Camera settings]
A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the gearstick is in the REVERSE (R)
position.
Camera View mode also allows you to check what is behind you while driving.
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 11).
NOTE
To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 18).
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the gearstick is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch while the camera image is displayed, the displayed image turns off temporarily.
18
En
Menu Item Description
[Back Camera Input] Setting rear view camera activation.
[Off] [On]
[Camera Polarity] Setting the polarity of the rear view camera.
[Battery] The polarity of the connected lead is positive.
[Ground] The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
[System Language]
Menu Item Description
[System Language] Select the system language.
NOTES
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• Some characters may not be displayed properly.
[Steering Wheel Control]
Menu Item Description
[Steering Wheel Control]
Select [With Adapter] or [No Adapter] according to your
[With Adapter] [No wired remote control.
Adapter]
NOTES
• This setting is available only when you stop your vehicle in a safe
place and apply the handbrake.
• Depending on your vehicle, this function may not work properly.
In this case, contact your dealer or an authorised PIONEER
Service Station.
• Please use a PIONEER wiring harness for each car model when
[With Adapter] mode is engaged, otherwise select [No Adapter].