Multi-Media Card (Mmc)/Sd Slot; Adding Maps To Your Fishfinder - Humminbird 597ci Combo Operation Manual

Inserting an MMC/SD
into the Card Slot
NOTE: The MMC/SD Cards require a separate purchase. For more information, visit
our web site at www.humminbird.com or contact our Customer Resource Center
at 1-800-633-1468.
To insert an MMC/SD card:
1. Remove the MMC/SD slot cover.
2. Position the MMC/SD card so that the label faces the right side of the
unit, and insert the card into the slot. Press down on the card until it
clicks into place.
3. Close the slot cover and turn the knob just 1/4 of a turn to close. Do
NOT overtighten, as this will not improve water resistance and may
damage the cover.
To remove an MMC/SD card:
1. Remove the MMC/SD slot cover.
2. Press the MMC/SD card into the slot and then release. The card will
eject from the slot.
A A d d d d i i n n g g M M a a p p s s t t o o Y Y o o u u r r F F i i s s h h f f i i n n d d e e r r
Your 500 Series™ Fishfinder includes a built-in UniMap™. You can also purchase
MMC/SD cards with additional chart information for a particular location.
When you install the MMC/SD cards in your control head, your 500 Series™
Fishfinder will retrieve that chart and display it automatically (see
Multi-Media Card MMC/SD).

Multi-Media Card (MMC)/SD Slot

Multi-Media Card
(MMC)/SD Slot
The multi-media card (MMC)/SD slot on your
control head can be used with MMC/SD cards
(optional-purchase required) to add detailed
charts to your Fishfinder or export navigation
data from your Fishfinder.
42