LG SL7Y Owner's Manual page 52

Connection
2
Connecting the Speaker
to your Home Network
Requirements
y A wireless router must be connected to the
internet.
y A smart device such as a smartphone or tablet
must be connected to the wireless router via Wi-
Fi connection.
,
Note
y Make sure that DHCP' s server is activated on
wireless router.
y If you cannot connect the speaker with your
router, go to setting of the router and then
make sure that "Allow wireless client to see
each other and access my local network" box
is unchecked.
y In a network environment (Router, Internet
and Internet Service Provider) that supports
both IPv4 and IPv6, the network
automatically connects to IPv4 or IPv6 when
connecting to the network.
You can check the each network status by
selecting the settings of My Speakers
([ ]>[IP Info.]) on "LG Wi-Fi Speaker" app.
Simple Connection
Preparation
y For Simple Connection, Wi-Fi network condition is
needed.
y Make sure that the Bluetooth setting on your
smart device in on.
y Select WI-FI function by using F on the remote
control or F on the speaker.
,
Note
Simple Connection is supported by Bluetooth
Ver 4.0 (or higher).
1. Check the position and condition of the speaker
and select [Next].
If you use Android device, Location authorization
is needed. Go to the next step if you use iOS
device.
Allow the Location authorization. And then press
[Next] again.