TP-Link AP300 User Manual page 49

Q5. What can I do if my wireless is not stable?
It may be caused by too much interference, you can try the following methods:
• Set your wireless channel to a different channel.
• Move the AP device to a new location away from Bluetooth devices and other
household electronics, such as cordless phone, microwave, and baby monitor, etc., to
minimize signal interference.
Q6. What can I do to maximize my signal strength in Repeater/Bridge
mode?
When choosing an ideal location to optimize wireless signal in Repeater/ Bridge mode,
please use the following tips.
• The Best Way is Halfway
Generally, the ideal location for the repeater is halfway between your wireless router
and your wireless clients. If that is not possible, place it closer to your wireless router to
ensure stable performance.
• Less Obstacles Ensure Better Performance
Choose a location with less obstacles that may block the signal between the AP device
and the host network. An open corridor or a spacious location is ideal.
• Less Interference Provides More Stability
Choose a location away from Bluetooth devices and other household electronics, such
as cordless phone, microwave, and baby monitor, etc., to minimize signal interference.
46