Connecting The Displayport (Displayport To Displayport) Cable; Connecting The Hdmi Cable - Dell UltraSharp U4924DW User Manual

Connecting the DisplayPort (DisplayPort to DisplayPort) cable

Connecting the HDMI cable

NOTE: The default out of factory setting is HDMI 2.1. If the monitor
fails to display video, displays video in lower resolution, or cannot
detect monitor speaker after the HDMI cable is connected, follow the
procedures below to change the settings from HDMI 2.1 to HDMI 2.0, or
HDMI 1.4:
• Press the joystick to open the Menu Launcher.
• Toggle the joystick to select Input Source
Alternatively, toggle the joystick to select Menu
Source menu (see
• Toggle the joystick to highlight HDMI 1 or HDMI 2.
│
46 Setting up the monitor
Input Source).
.
, and highlight the Input