D-Link DIR-620 Quick Installation Manual page 21

Multifunction wireless router supporting wimax, 3g gsm/cdma with built-in switch

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620

11. For connection of PPTP + Dynamic IP or L2TP + Dynamic IP type: if

your ISP has provided the address of the DNS server, in the IP section,

deselect the Obtain DNS server addresses automatically

checkbox and fill in the Primary DNS server field. Then in the VPN

section, enter authorization data provided by your ISP (the username

(login) in the Username field and the password in the Password and

Password confirmation fields), or select the Without authorization

checkbox if authorization is not required. In the VPN server address

field, enter the IP or URL address of the PPTP or L2TP authentication

server. If your ISP applies encryption, select a needed value from the

Encryption drop-down list.

12. Click the Save button.

13. On the Net / WAN page, select the choice of the Default gateway radio

button corresponding to the new WiMAX WAN connection.

Quick Installation Guide

Table of Contents