National Instruments PCI-8361 User Manual page 97

Nonoperating shock
Random Vibration
Operating
Nonoperating
Safety
This product is designed to meet the requirements of the following standards of safety for
electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
For UL and other safety certifications, refer to the product label or the
Note
Product Certification
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards of EMC for
electrical equipment for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
For EMC declarations and certifications, refer to the
Note
Certification
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
section.
section.
MXI-Express x1 Series User Manual
50 g peak, half-sine, 11 ms pulse
(Tested in accordance with IEC 60068-2-27.)
5 to 500 Hz, 0.3 g
rms
5 to 500 Hz, 2.4 g
rms
(Tested in accordance with IEC 60068-2-64.
Nonoperating test profile exceeds the
requirements of MIL-PRF-28800F, Class 3.)
© National Instruments Corporation | B-13
Online
Online Product