Operation; Starting The Engine - Yamaha KODIAK 2019 Owner's Manual

Table of Contents

Advertisement

EBU19882
EBU19902
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
EWB00632
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
7
EBU38301

Starting the engine

This model is equipped with an ignition circuit cut-
off system. To enable starting one of the following
conditions must be met:
 The drive select lever is in the neutral or park po-
sition.
 The rear brake lever or brake pedal is applied.
TIP
It is recommended to shift into neutral or park and
apply the rear brake when starting the engine.

OPERATION

ECB00151
NOTICE
See the "Engine break-in" section on page 7-4
prior to operating the engine for the first time.
To start the engine
1. Turn the key to "
switch to "
YFM700FWB
The coolant temperature warning light, the
engine trouble warning light, and the fuel level
warning light should come on for a few sec-
onds, then go off.
YFM700FWBD / YFM70KPAL
 The battery voltage warning light, the cool-
ant temperature warning light, and the en-
gine trouble warning light should come on
for a few seconds, then go off.
 The electric power steering warning light
should come on and stay on until the en-
gine is started.
7-1
" (on) and the engine stop
" (run).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm700fwbdYfm700fwbYfm70kpal

Table of Contents