Upgrading Via Network; Upgrading Via Local Upload - Grandstream Networks GXW45 Series User Manual

Upgrade
The GXW450X can be upgraded to a new firmware version remotely or locally. This section describes how to upgrade your GXW450X via network
upload.

Upgrading via Network

The GXW450X can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a downlo
method. Configure a valid URL for TFTP, HTTP, or HTTPS; the server name can be FQDN or IP address.
The upgrading configuration can be accessed via Web GUI��Maintenance��Upgrade.
Upgrade Via
Firmware Server Path
Firmware File Prefix
Firmware File Suffix
HTTP/HTTPS User Name
HTTP/HTTPS Password
Please follow the steps below to upgrade the firmware remotely.
1. Enter the firmware server path under Web GUI��Maintenance��Upgrade.
2. Click on "Save". Then reboot the device to start the upgrading process.
3. Please be patient during the upgrading process. Once done, a reboot message will be displayed in the LCD.
4. Manually reboot the GXW450X when it's appropriate to avoid immediate service interruption. After it boots up, log in to the Web GUI to chec
firmware version.

Upgrading via Local Upload

If there is no HTTP/TFTP server, users could also upload the firmware to the GXW450X directly via Web GUI. Please follow the steps below to uplo
firmware locally.
1. Download the latest GXW450X firmware file from the following link and save it on your PC:
2. Log in to the Web GUI as an administrator on the PC.
3. Go to Web GUI��Maintenance��Upgrade, upload the firmware file by clicking on
from your PC. The default firmware file name is gxw4500fw.bin
Figure 76: Network Upgrade
Allow users to choose the firmware upgrade method: TFTP, HTTP, or HTTPS.
Configures firmware server path.
For example, firmware.grandstream.com
If configured, only the firmware with the matching encrypted prefix will be downloaded.
If configured, only the firmware with the matching encrypted postfix will be downloaded.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
Table 48: Network Upgrade Configuration
https://www.grandstream.com/support/firmware
and select the firmwa