First Alert FG250A Quick Start Manual

IONIZATION
Ionization sensing chamber. Generally more effective
at detecting small particles produced by flaming fires.
Sources may include paper or kitchen grease.
SILENCE FEATURE
Silences nuisance alarms.
TAMPER RESISTANT LOCKING PIN
Locks alarm cover to prevent removal of battery.
Perfect for apartment, dormitory or hotel applications.
9V BATTERY INCLUDED
END OF LIFE SIGNAL
Provides audible notice when alarm needs to be
replaced after 10 years.
SMOKE ALARM
Model FG250A
First Alert Model FG250A (Cat. 1039881) is a single station
smoke alarm specifically designed for residential and institutional
applications including sleeping rooms of hospitals, hotels, motels,
dormitories, and other multifamily dwellings as defined in standard
NFPA 101. Model FG250A has been fully tested and complies
with, ULC S531, NFPA 72, and NFPA 101 and other agencies
that model their codes after the above agencies. It meets building
codes where DC with Silence smoke alarms are required and with
model building codes published by the ICC.
First Alert FG250A is a state of the art smoke alarm designed
to provide early warning of a fire. It features a fully insect
screened ionization smoke sensing chamber, an 85dB horn, a
supervised 9V battery power supply, a full function test switch,
a silence feature to silence unwanted nuisance alarms, a red
LED light that indicates DC power or alarm. It also features a
tamper resistant locking pin that locks alarm cover to prevent
removal of battery. Perfect for apartment, dormitory or hotel
applications. The compact, low profile design complements any
décor. Battery installation and removal can occur while the unit
is mounted to the ceiling or wall via the hinged cover. To insure
the battery is always replaced properly, the cover is designed to
resist closing when the battery is missing. Designed for wall or
ceiling mounting. Includes mounting anchors and screws.
Model FG250A
Cat. 1039881