Electrical Connection; Handling And Operation; Initial Use - Silvercrest SADH 12 B2 Operating Instructions Manual

Electrical connection

IMPORTANT
► Before you connect the appliance to the power supply, check to
ensure that the required input voltage as given on the type plate
tallies with that for the intended power source. To avoid possible
damage to the appliance this data must match.
Check to ensure that the cable for the power adapter e is not
►
damaged and that it does not lead over hot surfaces and or
sharp edges, otherwise it could be damaged.
Ensure that the cable for the power adapter e is not over-taut
►
or kinked.
Connect the power adapter e to the appliance by inserting the
♦
plug into the plug socket 8 on the underside of the appliance.

Handling and operation

Initial use

IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a stable and level surface.
♦ Remove the cover w and lid 1.
♦ Fill the water tank 3 with at least 20 ml (maximum 300 ml)
clean tap water using the provided measuring beaker r. Note
the maximum filling level 6 marked with MAX.
♦ Add 2–4 drops of the desired oil to the water.
♦ Afterwards, place the lid 1 and cover w back on the water
tank 3.
♦ Connect the mains adapter e to the mains socket.
SADH 12 B2 / SADH 12 C2
GB │ IE │
11 ■