Fujitsu BS2000 SE320 Basic Operating Manual page 65

1) The following events are detected as predictable errors:
The temperature is very high.
The power consumption is very high.
The strength of current is very high.
The fan speed is very low.
In each of these cases please notify Customer Support.
Assignment of the PCIe slots
The assignment of the PCIe slots differs between MU M1, MU M2 and MU M3.
PCIe slot assignment on an MU M1
Figure 30: Principle of PCIe slot assignment at the rear of the device (MU M1)
The figure shows the PCIe slots of the MU M1 on an SE700. On the various model series of the SE server, the
PCIe slots of an MU M1 are assigned as follows:
PCIe slot SE700
S1 not assigned
S2 USB card
S3 FibreChannel card FibreChannel card not assigned
Table 2: PCIe slot assignment on an MU M1
The MU M1 can be equipped with a second FibreChannel card in the free PCIe slot S1. Accordingly, two more ports
are available for the ROBAR connection and cluster functionality.
SE500 SE300
not assigned not assigned
USB card not assigned
65