Table of Contents
Advertisement
152958 39/0en
16-02-2005
Operating instructions
Use of "3 in 1" combi detergents
General advice
These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.
1. Before using these products you should first check that the
water hardness in your supply is compatible with the use of
these products as per the detergent manufacturers (on the
product packaging).
2. These products should be strictly used according to the detergent
manufacturers instructions.
3. If you encounter problems when using 3 in 1 products for the first
time then please contact the detergent manufacturers care line
(the telephone number is given on the product packaging).
Special advice
When using combination 3 in 1 products, we recommend the use of
the "3 in 1" function.
If you decide to turn back to the use of the standard detergent system
we advise that you:
Refill both the salt container and rinse aid dispenser.
Switch the water hardness setting to the highest possible position
and run from 1 to 3 normal washing programmes without a load.
Readjust the water hardness setting again according to the
hardness of the water in your area.
26
10:50
Pagina 26
Advertisement
Table of Contents
